Screen Structure; Configuring Initial Setup Items; Enabling Option Functions - Sony REA-C1000 Operating Instructions Manual

Screen Structure

The following screen appears in the web browser when
you access the unit.
You can configure the unit, and configure and run
applications from this screen.
Note
The initial setup screen appears by default when you
access the unit in its factory default state.
A [Applications]
Click to select, configure, or run an application.
Clicking displays the available applications.
Selecting an application displays the setup and run
screen of the application.
B Common settings menu
Click to configure common settings of the unit, such
as video and network settings.
C Operation/settings area
Displays the selected menu item screen or
application setup screen.
D Notifications button
A red indicator is displayed on the notifications
button when there is a notification relating to the
status of the unit. Click it to display the notifications
dialog.
Configuring Initial Setup
Items
Access the unit in the factory default state, and configure
the following items.
[EULA]
Displays the EULA (End User License Agreement).
[Language]
Specify the display language of the screen. For details
about configuration, see "System" (page 18).
[Administrator]
Set [User Name] and [Password] for the administrator.
For details about configuration, see "Security"
(page 14).
[Network]
Configure the network settings for connection between
the unit and a computer. For details about configuration,
see "Network" (page 13).
[Date & Time]
Set the date and time on the unit. For details about
configuration, see "System" (page 18).
[System Frequency]
Set the system frequency for the unit to support. For
details about configuration, see "Video" (page 12).
Notes
• Be sure to change the default user name and password
used when you first start the unit. After changing the
user name and password, reauthentication using the
new user name and password is required.
• If the network settings are changed, access the unit
again using the changed network information.
• The unit must be restarted after completing the initial
setup.

Enabling option functions

Option functions must be enabled before configuring or
running an application. To enable an option function,
you must activate a pre-installed license or purchase and
install a license. For details about installing a license,
see "License" (page 17).
Licenses
The following option function licenses are available for
the unit.
• REA-L0100 Handwriting Extraction license
Enables the Handwriting Extraction function.
• REA-L0200 PTZ Auto Tracking license
Enables the PTZ Auto Tracking function.
• REA-L0300 Close-up by Gesture license
Enables the Close-up by Gesture function.
9