Running The Real-Time Cropping Application - Sony REA-C1000 Operating Instructions Manual

3
Configure the following settings.
Crop area position
Move the blue frame displayed on the preview
screen to specify the crop position.
Crop area size
Move the four blue circles displayed on the preview
screen to specify the size of the crop area.
4
When finished, click the [Done] button.
The setup is saved in the unit.
Running the Real-time Cropping
application
Run this application to simulate the output of two
cameras by showing a main image and a cropped image.
1
Select [Real-time Cropping] from
[Applications].
2
Click the [Run] button.
The run screen appears.
The normal image is shown on the right and the
cropped image is shown on the left.
Notes
• You can change the crop area position while the
application is running, but the changes are not saved
in the settings.
• The resolution of the close-up output image may be
reduced depending on the resolution of the input
image from the camera.
30