Table of Contents
Advertisement
may not start correctly depending on the configured
position.
Tracking lost wait time
Set the wait time from when the person being
tracked is no longer visible until tracking is deemed
to be lost.
This can be configured when the tracking mode is
set to [Free Object Pan Tracking]. It is not
configurable when the tracking mode is set to [Fixed
Frame Pan Tracking].
When the tracking mode is set to [Fixed
Frame Pan Tracking]
Board limits
When the tracking mode is set to [Fixed Frame Pan
Tracking], the person is tracked while moving left/
right in front of the blackboard or screen while
giving priority to keeping the contents of the board
within the field of view.
Move the four blue circles displayed on the preview
screen to set the board limits to define the capture
area to be maintained on the screen when panning.
16
When finished, click the [Done] button.
The setup is saved in the unit.
Running the PTZ Auto Tracking
application
Run this application to track a person captured by the
camera, according to the setup, and to output the
tracking image.
1
Select [PTZ Auto Tracking] from
[Applications].
2
Click the [Run] button.
The run screen appears.
You can check the video that is output using the
preview image while the application is running.
You can check the operating status of the
application in the bottom right of the screen while
the application is running.
[Detecting]: Person is detected at the home
position. A face frame is attached to the person.
[Tap on Target Face]: In this state, you can select
the face frame of a person to be tracked
manually. Select a face frame.
[Tracking]: Person was detected and is being
tracked.
[Target Lost]: Person being tracked is no longer
visible and tracking has been lost. If the tracking
mode is set to [Free Object Pan Tracking], the
camera moves to the recovery position and
detection restarts.
To start tracking manually
When [Start Tracking Automatically] is disabled, you
must select the person to be tracked manually while the
application is in the [Tap on Target Face] state.
When [Start Tracking Automatically] is enabled, you
can also select a person while the application is in the
[Detecting] state, before tracking normally starts, to start
tracking that person manually.
In either case, select a displayed face frame to select the
target.
To return to the home position
Tracking a person may not be successful occasionally,
depending on their movement or clothing. When the unit
can no longer track correctly, the unit automatically
attempts to re-detect a person. You can also click the
[Reset Camera] button to restart tracking detection from
the home position.
27
Hide quick links:
Advertisement
Table of Contents
