Sony REA-C1000 Operating Instructions Manual page 26

Detection area
Move the four blue circles displayed on the preview
screen to mark the detection area for tracking within
the home position.
A person will be tracked when they enter this area.
Sensitivity
Set the response sensitivity for tracking when the
person to track starts to move.
[Normal]: Respond with standard sensitivity.
[Sensitive]: Respond with higher sensitivity than
the [Normal] setting.
Start tracking automatically
Place a check mark in [Start Tracking
Automatically] to automatically start tracking when
a person is detected within the home position
detection area. Leave the checkbox empty when you
want to start tracking manually.
Also, always set [Tracking Start Time] for
automatic tracking.
Tracking start time
Automatic tracking starts when a person has been
captured continuously for a duration exceeding the
time set in [Tracking Start Time].
10
When finished, click the [Next] button.
11
Configure the following settings.
Mask
Set the mask areas in order to prevent false detection
of objects other than the person to be tracked during
tracking.
Move the four gray circles displayed on the preview
screen, as required, to adjust the height to
effectively narrow the detection area during
tracking.
The mask areas are excluded from the detection
target during tracking.
Note
The mask areas must not cover the area specified for
the home position detection area.
12
When finished, click the [Next] button.
13
Configure the following settings.
PTZ limits
Specify the range of the pan operation of the camera
during tracking. If a range is not specified or the
specified range is invalid, the unit automatically sets
the range for pan operations.
This can be configured when the tracking mode is
set to [Free Object Pan Tracking]. It is not
configurable when the tracking mode is set to [Fixed
Frame Pan Tracking].
14
When finished, click the [Next] button.
15
Configure the following settings.
When the tracking mode is set to [Free
Object Pan Tracking]
Recovery position
Set the camera position, using the PTZ controls, to
move the camera to where detection is resumed
when the person is no longer visible and tracking is
lost during tracking.
This can be configured when the tracking mode is
set to [Free Object Pan Tracking]. It is not
configurable when the tracking mode is set to [Fixed
Frame Pan Tracking].
After tracking is lost, the camera moves to the
recovery position and detection restarts. After
redetection, tracking restarts automatically when a
person has been captured continuously for a
duration exceeding the time set in [Tracking Start
Time].
Note
It is recommended that you set the camera view for
the recovery position to a slightly wider view than
the home position, but re-detection and tracking
26