Makita JR100D Technical Information page 4

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Slider (cont.)
DISASSEMBLING
Fig. 5
6. Remove Gear housing by
unscrewing M4x14 Pan head
screws (3pcs).
Gear housing
ASSEMBLING
(1) Assemble Slider guide and Sponge seal to Slider (Fig. 6).
Fig. 6
1. Facing the protruded side to the Loop side,
pass Slider guide through Slider.
Loop side
Slider Slider
(2) Assemble the Slider to Gear housing cover (Fig. 7).
Fig. 7
3. When assembling Slider to Gear
housing cover, face its projection
side to the thin rib side of Gear
housing cover.
Projection of
Slider
Thin rib
7. Remove Plate by unscrewing
M4x14 Pan head screws
(2pcs).
Plate
protruded side of
Slider guide
4. Fitting the projection of Slider guide
and Sponge seal to the Grooves in
Gear housing cover, assemble Slider
to Gear housing cover.
Slider
Projection of
Slider guide
Gear housing
cover
Groove for Slider
Thick rib
guide fitting
8. Remove Slider, Slider guide
and Sponge seal.
Slider
2. Pass Sponge seal through Slider.
Sponge seal
5. Fix Plate to Gear housing
cover with M4x14 Pan head
screws
Sponge seal
Plate
Groove for Sponge
seal fitting
P 4/ 12
Sponge seal
Slider guide