Download Print this page
Makita JR100D Technical Information
Makita JR100D Technical Information

Makita JR100D Technical Information

10.8v cordless recipro saw
Hide thumbs Also See for JR100D:

Advertisement

T
ECHNICAL INFORMATION
Model No.
Description
C
ONCEPT AND MAIN APPLICATIONS
Model JR100D/ JR102D are compact and lightweight
10.8V cordless recipro saws; JR100D is equipped with Toolless blade clamp
while JR102D is equipped with Blade clamp for both Recipro saw and Jig saw blades.
Their advantages are:
• Toolless blade clamp for Recipro saw blade (model JR100D only)
• Blade clamp compatible with both Recipro saw and Jig saw blades (model JR102D only)
• Compact and lightweight handy body for comfortable operation
• Multi-position switch enables various grip position for versatile operations.
These products are available in the following variations.
Model No.
type
JR100DZ
BL1013
(Li-ion 1.3Ah)
JR100DWE
---
---
BL1014
(Li-ion 1.3Ah)
---
---
JR102DZ
BL1013
(Li-ion 1.3Ah)
JR102DWE
All models also include the accessories listed below in "Standard equipment".
S
pecification
Model No.
Cell
Voltage: V
Battery
Capacity: Ah
Energy capacity: Wh
Charging time (approx.): min.
Strokes per minutes: min.
Length of stroke: mm (")
Capacity: mm (")
Blade clamp type
Jig saw blade compatibility
Switch lock
Electric brake
Variable speed control by trigger
LED job light
Weight according to EPTA-Procedure 01/2003: kg (lbs)
*2: for North and Central American countries
S
tandard equipment
JR100D
[All countries]
Recipro saw blade 100mm (for wood) .... 1
Recipro saw blade 100mm (for metal) .... 1
Note: The standard equipment for the tool shown above may vary by country.
O
ptional accessories
Charger DC10WA (DC10WB for North and Central American countries)
Battery BL1013 (BL1014 for North and Central American countries)
Recipro saw blades, Jig saw blades (for JR102D only)
JR100D/ JR102D
10.8V Cordless Recipro Saw
Battery
Charger
quantity
No
No
2
DC10WA
No
No
2
DC10WB
No
No
2
DC10WA
¹= spm (strokes per minute)
ˉ
Wood
Pipe: Ø
JR102D
[All countries except Sweden, Finland, Estonia]
Recipro saw blade 100mm (for wood) ....... 1
Recipro saw blade 100mm (for metal) ....... 1
Hex wrench 3 .............................................. 1
Plastic
Hex
Housing
carrying case
wrench
No
No
Makita-blue
Yes
Makita-blue
No
No
white
Makita-blue
Yes
No
white
No
Yes
Makita-blue
Yes
JR100D
10.8
50 with DC10WA, (DC10WB
Toolless
No
1.2 (2.6)
OFFICIAL USE
for ASC & Sales Shop
PRODUCT
W
H
L
(Drawn above is
Model JR100D.)
Dimensions: mm (")
Length (L)
Width (W)
63 (2-1/2)
Height (H)
146 (5-3/4)
Offered to
color
All countries except North and
Central American countries
North and Central
American countries
All countries except North and
Central American countries
JR102D
Li-ion
(10.8/12Vmax
)
*
,
2
1.3
14
)
*
2
0 - 3,300
13 (1/2)
50 (2)
50 (2)
Hex wrench is required.
Yes
Lock-off
Yes
Yes
Yes
1.1 (2.5)
JR102D
[Sweden, Finland, Estonia]
Jig saw blade B-10 (for wood) .... 1
Jig saw blade B-18 (for wood) .... 1
Jig saw blade B-24 (for metal) .... 1
Hex wrench 3 ............................... 1
P 1/ 12
355 (14)

Advertisement

loading

Summary of Contents for Makita JR100D

  • Page 1 ONCEPT AND MAIN APPLICATIONS Model JR100D/ JR102D are compact and lightweight 10.8V cordless recipro saws; JR100D is equipped with Toolless blade clamp (Drawn above is while JR102D is equipped with Blade clamp for both Recipro saw and Jig saw blades.
  • Page 2: Necessary Repairing Tools

    1R281 Round Bar for Arbor 7-50 removing Ball bearing 6902ZZ from Gear housing [2] LUBRICATION Apply Makita grease N. No.2 to the following portions designated with the black triangles to protect parts and product from unusual abrasion. Item No. Description...
  • Page 3 Housing (L) Fig. 3 3. Remove Gear housing section from Housing (L). 4. Remove Shoe from Gear housing by unscrewing M4x10 Countersunk head screws from the both side of Gear housing. Model JR100D Gear housing Shoe Model JR102D Shoe Gear housing Fig.
  • Page 4 P 4/ 12 epair [3] DISASSEMBLY/ASSEMBLY [3] -1. Slider (cont.) DISASSEMBLING Fig. 5 6. Remove Gear housing by 7. Remove Plate by unscrewing 8. Remove Slider, Slider guide unscrewing M4x14 Pan head M4x14 Pan head screws and Sponge seal. screws (3pcs). (2pcs).
  • Page 5 Loop portion of Slider Gear housing Gear housing cover (4) Assemble Blade holder section or Blade clamp to Slider (Fig. 9). Fig. 9 For JR100D M3x12 Hex socket Blade holder section. 8. Assemble Blade holder section to head bolt Slider.
  • Page 6: Gear Complete

    P 6/ 12 epair [3] DISASSEMBLY/ASSEMBLY [3] -2. Gear complete DISASSEMBLING (1) Disassemble Housing (R) from Housing (L) and remove Gear housing section from Housing (L) (Fig. 2, 3, 4.) (2) Remove Gear housing from Gear housing cover (Fig. 5 (3) Put Gear housing on 1R258 and remove Gear complete with Arbor press (Fig.
  • Page 7 P 7/ 12 epair [3] DISASSEMBLY/ASSEMBLY [3] -3. Toolless Blade Holder Section (Model JR100D) DISASSEMBLING (1) Disassemble Housing (R) from Housing (L) and remove Gear housing section from Housing (L) (Fig. 2, 3). (2) Remove Shoe from Gear section by unscrewing M4x10 Countersunk head screws (Fig. 3).
  • Page 8 P 8/ 12 epair [3] DISASSEMBLY/ASSEMBLY [3] -3. Toolless Blade Holder Section (Model JR100D) (cont.) ASSEMBLING (2) Do further step for Assembling in the order of Fig. 14, 15, 16, 17, 18. Fig. 14 3. Mount Guide sleeve to Blade guide.
  • Page 9 P 9/ 12 epair [3] DISASSEMBLY/ASSEMBLY [3] -3. Toolless blade holder section (Model JR100D) (cont.) ASSEMBLING (1) Assemble Blade guide to Slider in case Blade guide is removed from Slider (Fig. 9). Fig. 17 90° 8. Hold Gear housing with vise and grip Connecting sleeve Driving sleeve with Water pump pliers over a cloth so as not to damage it.
  • Page 10 P 10/ 12 epair [3] DISASSEMBLY/ASSEMBLY [3] -4. Switch lever F complete DISASSEMBLING (1) Disassemble Housing (R) (Fig. 2). (2) Remove Switch lever section from Housing (L) and disassemble it as drawn in Fig. 19. Fig. 19 1. Remove Switch lever unit; 2.
  • Page 11: Circuit Diagram

    P 11/ 12 ircuit diagram Fig. D-1 Color index of lead wires' sheath Black White Terminal Switch DC Motor Line filter unit (for the countries where suppression of Radio interference is regulated) Connector iring diagram Fig. D-2 Wiring of LED Lead wire (Before setting DC Motor and Gear housing) Store the extra portion of Lead wires in this space designated Fix the Lead wires in these...
  • Page 12 P 12/ 12 iring diagram (cont.) Fig. D-3 Fig. D-4 Wiring to DC Motor Wiring to Terminal Assemble DC Motor to Housing (L), * the Lead wires must be faced to Housing (R) side. Connect the Lead wires to * the Lead wire (black) must be located to the Switch trigger side. Terminal as drawn below.

This manual is also suitable for:

Jr102d