Makita JR100D Technical Information page 3

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Slider (cont.)
DISASSEMBLING
Fig. 2
1. Remove Set plate before removing
3x16 Tapping screws (8pcs).
small slotted screwdriver
Set plate
Fig. 3
3. Remove Gear housing section from Housing (L).
Model JR100D
Model JR102D
Fig. 4
5. Remove M3x12 Hex socket head bolts (2pcs). Now, Blade holder section is removed from Slider.
M3x12 Hex socket head bolt
Model JR100D
5a. Remove Clamper, Pin 3 and M6x10 Hex socket set screw. So, Blade clamp is removed from Slider.
Model JR102D
Housing (R)
Housing (R)
Housing (L)
Clamper
2. Remove Housing (R) by unscrewing 3x16 Tapping screws
(8pcs).
4. Remove Shoe from Gear housing by unscrewing
M4x10 Countersunk head screws from the both side
of Gear housing.
Gear housing
Gear housing
Blade holder section.
M6x10 Hex socket set screw
Pin 3
P 3/ 12
Shoe
Shoe
Blade clamp