3.4 Rotation direction for portrait installation
Caution
・In case of portrait installation, please rotate the products counterclockwise 90 degrees when viewed from the front.
Remote Control Sensor
Rotation 180°Function
This model has a function to rotate displayed content 180°
To activate this function, from OSD menu 「MENU」→「MONITOR」→「ROTATE 180」→「ON」
(Interlaced signals may not be displayed properly.)
LCD Panel
Side
1 2 3
Rotate 180 「OFF」
-Please check indication label and
pay attention to rotation direction in
case of portrait installation by using
mounting hardware.
-Please change OSD indication from
landscape to portrait in case of
portrait installation.
「MENU」 → 「MONITOR」 →
「PORTRAIT/LANDSCAPE INSTALL」
→ 「PORTRAIT」
(Rating Label)
Rotate 180 「ON」
26
PN-HB851/HB751/HB651/HM851/HM751/HM651 Installation Guidelines <Rev1.0> April. 2019
Confidential
For use by Sharp authorized dealers
and distributors only.
Not for general distribution.
Indication