Confidential
2.12 Precautions for cable wiring
For use by Sharp authorized dealers
and distributors only.
Not for general distribution.
Binding Cables
Be sure to clamp the power cord (supplied) by using the supplied cable clamp (affixing type). When clamping the power
cord, take care not to stress the terminal of the power cord. Do not bend the power cord excessively.
The supplied cable clamps (affixing type) can be used to clamp the power code and cables connected to the back of the
monitor.
・Attach the supplied cable clamps to a flat surface. Do not attach over a vent.
・Remove any dust or dirt before attaching.
20
PN-HB851/HB751/HB651/HM851/HM751/HM651 Installation Guidelines <Rev1.0> April. 2019