Moving Recorded Tracks; Move Function; Naming A Track Or Md; Name Function - Sony MDS-S50 Operating Instructions Manual

2
Turn AMS (or press ./>
repeatedly) until "Combine ?" appears,
then press AMS or YES.
3
Turn AMS (or press ./>
repeatedly) until the number of the first
track of the two to be combined
appears, then press AMS or YES.
The display for selecting a second track
appears and the deck plays the portion
where joining will occur (the end of the first
track and the beginning of the second track
following it) repeatedly.
4
Turn AMS (or press ./>
repeatedly) until the number of the
second track of the two to be combined
appears, then press AMS or YES.
"Complete!!" appears and the deck starts to
play the combined track.
Notes
• Tracks recorded in different modes (stereo, MONO,
LP2 or LP4) cannot be combined.
• If both of the combined tracks have track titles, the
title of the second track is erased.
• If "Impossible" appears in the display, the tracks
cannot be combined because repeated editing has
been done to the track(s). This is a technical
limitation of the MD system and is not a mechanical
error.

Moving recorded tracks

— Move Function

You can use this function to change the order of
any track on the disc. When you move tracks,
the tracks are automatically renumbered.
Example: Moving track 3 to position 2.
Track
number
Original
tracks
After
MOVE
1
While the deck is stopped, playing, or
paused, press MENU/NO.
"Edit Menu" appears in the display.
2
Turn AMS (or press ./>
repeatedly) until "Move ?" appears,
then press AMS or YES.
3
Turn AMS (or press ./>
repeatedly) until the number of the track
to be moved appears, then press AMS
or YES.
4
Turn AMS (or press ./>
repeatedly) until the new track position
appears, then press AMS or YES.
"Complete!!" appears and the deck starts to
play the moved track.

Naming a track or MD

— Name Function

You can enter a name for a recorded MD as well
as for individual tracks. Names can consist of
uppercase and lowercase letters, numbers, and
symbols. A total number of about 1,700
characters can be stored for all the names on the
MD.
Note
If you name a track while it is being recorded, be sure
to finish the naming operation before the track ends. If
the track ends before you finish, the entered character
data will be discarded and the track will remain
unnamed. Also, you cannot name tracks while the
deck is recording over existing material.
Naming a track or an MD
using the controls on the
deck
1
Press MENU/NO.
"Edit Menu" appears in the display.
To enter a name while the deck is recording,
go to step 3.
2
Turn AMS until "Name ?" appears, then
press AMS or YES.
continued
23