Editing Recorded Mds; Erasing Recordings; Erase Function - Sony MDS-S50 Operating Instructions Manual

Changing the contents of the
program
While the deck is stopped and "PGM" lights up,
do steps 1 and 2, followed by one of the
procedures below:
To Do the following:
Press m/M repeatedly
Erase a track
until the number of the
unwanted track flashes, then
press CLEAR.
Erase all tracks Press down CLEAR until all
the track numbers disappear.
Press m repeatedly until
Add a track at the
beginning of the "0" flashes before the first
program track number, then do steps
3 to 5.
Press m/M repeatedly
Add a track in the
middle of the program until the track number which
will precede the new track
flashes. Press AMS to
display flashing "0," then do
steps 3 to 5.
Press M repeatedly until
Add a track to the end
of the program "0" flashes after the last
track number, then do steps
3 to 5.
Press m/M repeatedly
Replace a track
until the number of the track
to be changed flashes, then
do steps 3 to 5.

Editing Recorded MDs

Before editing
You can edit an MD only when:
• The MD is recordable.
• The MD play mode is normal play.
Check the following, before editing.
Canceling the last edit
Use Undo Function to cancel the last edit and
restore the contents of the MD to the condition
before the edit.
To quit while editing
Press MENU/NO.
After editing
Press Z to remove the MD or press ?/1
(power) to turn off the unit.
"TOC" lights up, or either "TOC" or
"STANDBY" starts flashing. The TOC is
updated and recording is completed.
Before pulling out the power cord
MD editing is completed when the MD Table of
Contents (TOC) is updated. The TOC is
updated when you eject the MD or press ?/1 to
turn off the unit. Do not pull out the power cord
before updating the TOC (while "TOC" is lit) or
while updating the TOC (while "TOC" or
"STANDBY" is flashing) to ensure a complete
editing.

Erasing recordings

— Erase Function

The MD deck lets you erase unwanted tracks
quickly and easily.
The three options for erasing recordings are:
• Erasing a single track (Track Erase Function)
• Erasing all tracks (All Erase Function)
• Erasing a portion of a track (A - B Erase
Function)
continued
19