3.26 Receiver Plate
REMOVAL
Use a Front Opening tool to release the Receiver Plate from
the Upper Inner Cover
B
E CAREFUL NOT TO DAMAGE THE
!
THE PROCEDURE
Pull up the Receiver Plate
INSTALLATION
1. Clean all adhesive on the Lower Inner Cover with
Isopropyl alcohol.
2. Align a new Receiver Plate Adhesive with tweezers
Use your fingers to align a new Receiver Plate on the Upper
Inner Cover
3/000 21-1/FEA 209 544/121 A
©
Sony Ericsson Mobile Communications AB
R
ECEIVER MESH DURING
Working Instruction, Mechanical
36(54)