15.4
Installing the rear wheel
Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
Warning
Danger of accidents There is no braking effect to start with at the rear brake after installing the rear
wheel.
–
Actuate the foot brake several times before going on a ride until you can feel a firm pressure point.
Main work
–
Check the rear hub damping rubber pieces.
–
Check the wheel bearing for damage and wear.
»
If the wheel bearing is damaged or worn:
–
Change the rear wheel bearing.
–
Remove spacer.
–
Clean and grease shaft seal ring
the spacer.
Long-life grease (
–
Insert a spacer.
F02072-10
WHEELS, TIRES 15
(
1
and contact surface
p. 342)
p. 252)
A
of
249