Advertisement
AstroJet 1000P
Quick Start Guide
Step 1
Unpack Printer and Accessories
Place Printer on a stable surface.
Attach Side Media Guides [1], Rear Media Guide and
Support [2] and Top Cover with included hardware.
Save packaging materials.
Step 2
Install 5 Inkjet Cartridges
1. Remove inkjet
cartridge from
packaging.
DO NOT touch copper
contacts, metal plate,
or gold printhead.
Remove protective
tape from printhead.
2. Open latch levers on
inkjet cartridge holders.
3. With cartridge
printhead pointing
down, slide cartridge
into holder, push down
and toward contacts in
holder.
4. Make sure cartridge is
seated in holder. Close
latch lever to secure
cartridge in holder.
DO NOT force lever
into place.
5. Repeat Steps 1-4 for remaining cartridges.
Page 1
Ink in cartridge may be harmful if
swallowed. Keep new and used
cartridges out of reach of
children. Discard empty
cartridges immediately.
Advertisement
Table of Contents
Related Manuals for AstroJet 1000P
Summary of Contents for AstroJet 1000P
- Page 1 AstroJet 1000P Quick Start Guide Step 1 Unpack Printer and Accessories Step 2 Place Printer on a stable surface. Attach Side Media Guides [1], Rear Media Guide and Install 5 Inkjet Cartridges Support [2] and Top Cover with included hardware.
- Page 2 Step 3 Step 5 Connect Power to Printer Install the Print Driver 1. Main power switch [1] is OFF. Connect one end Load “Printer Drivers” of power cord to printer receptacle [2]. CD into computer's 2. Plug other end into a 115-220 Volt AC, 50/60 CD/DVD drive.
- Page 3 Click Next>. Step 6 To install Accessories and for Printer set-up or operation, please refer to “AstroJet 1000P Printer Operator Manual”, supplied with Printer. 5. “Name Your Printer” screen. Unless another printer of same name is on system or network you can ignore this step.
Need help?
Do you have a question about the 1000P and is the answer not in the manual?
Questions and answers