Table of Contents
Advertisement
9. Troubleshooting
Message
"Paper size and type are
mismatched. Select another
tray from the following and
press [Continue]. To cancel
job, press [Job Reset].
Paper size and type can
also be changed in User
Tools."
"Paper type of n is
mismatched. Select another
tray from the following and
press [Continue]. Paper
type can also be changed
in User Tools."
(A tray name is placed at
n.)
"Parallel I/F board has a
problem."
"Printer font error."
226
Cause
The printer driver settings are
incorrect or the tray does not
contain paper of the size or
type selected in the printer
driver.
The type of the paper in the tray
does not match the paper type
specified in the printer driver.
An error has occurred in the
IEEE 1284 interface board.
An error has occurred in the
font settings.
Solution
• Check that the printer driver
settings are correct, and then
load paper of the size selected
in the printer driver into the
input tray. For details about
how to change the paper size,
see "Changing the Paper Size",
For First-time Users.
• Select the tray manually to
continue printing, or cancel a
print job. For details about how
to select the tray manually, or
cancel a print job, see "If an
Error Occurs with the Specified
Paper Size and Type", Print.
Select a tray containing paper that is
the same type as the specified paper
type.
Turn off the power, and then back on
again. If the message appears
again, contact your service
representative.
Contact your service representative.
Advertisement
Table of Contents
