Ricoh IM430 Series User Manual page 219

Message
"Check whether there are
any network problems."
[13-18]
"Check whether there are
any network problems."
[13-24]
"Check whether there are
any network problems."
[13-25]
"Check whether there are
any network problems."
[13-26]
Cause
Cannot access SIP server.
The password registered for
the SIP server is not the same
as the password registered
for this machine.
In [Effective Protocol], the IP
address is not enabled, or an
incorrect IP address has been
registered.
The "Effective Protocol" and
"SIP Server IP Address"
settings are different, or an
incorrect IP address has been
registered.
Messages Displayed When You Use the Fax Function
Solution
• Check that the correct SIP Server
IP Address is listed in [SIP
Settings] of [Fax Features]. For
details about SIP Settings, see
"Initial Settings", Fax.
• For details about network
problems, contact your
administrator.
For details about network problems,
contact your administrator.
• Check that IPv4 in [Effective
Protocol] is set to "Active" in
[System Settings]. For details
about effective protocol, see
"Interface Settings", Connecting
the Machine/ System Settings.
• Check that the correct IPv4
address is specified for the
machine in [System Settings]. For
details about IPv4 address, see
"Interface Settings", Settings.
• For details about network
problems, contact your
administrator.
• Check that the correct IP address
is specified for the machine in
[System Settings]. For details
about IP address, see "Interface
Settings", Settings.
• For details about network
problems, contact your
administrator.
217