Table of Contents
Advertisement
Problem
Misfeeds occur frequently.
Misfeeds occur frequently.
Misfeeds occur frequently.
Misfeeds occur frequently.
Misfeeds occur when
printing to envelopes.
Cause
Copy paper size setting is
not correct.
There is a foreign object on
the output tray.
Non-recommended paper is
being used. For example,
2
256 g/m
paper is loaded
in the paper tray.
The paper size that is set by
the paper size dial on the
paper tray differs from the
paper size that is loaded in
the paper tray.
The envelopes are curled.
When You Have Problems Operating the Machine
Solution
Remove the misfed paper. For details
about removing jammed paper, see
"Removing Jammed Paper",
Troubleshooting.
• Remove the misfed paper. For
details about removing jammed
paper, see "Removing Jammed
Paper", Troubleshooting.
• Do not place anything on the
output tray.
Use the recommended paper. For
details about recommended paper,
see "Recommended Paper",
Specifications.
• Use the recommended paper. For
details about recommended
paper, see "Recommended
Paper", Specifications.
• Set the paper size dial on the tray
correctly. For details, see
"Changing the Paper Size", For
First-time Users.
Make sure you fully flatten curled
envelopes before you load them. Do
not stack envelopes over the specified
limit for the paper tray. If misfeeds still
occur after the envelopes have been
flattened, load envelopes on the tray
one at a time and print them
individually. For details about how to
load envelopes, see "When Loading
Envelopes", Specifications.
209
Advertisement
Table of Contents
