Download Print this page

Trouble Shooting - Abatronic AMB-12H Instruction Manual

Through-wall air-to-air heat pump and air conditioner

Advertisement

■Condensed Water Drainage
If it is planned to move the unit or leave it out of use for a long time, it is recommended that any
remaining condensed water is drained out. (Figure 25).
1. Place a water container to hold up to 4 litres underneath the unit drain plug
2. Remove the stopper to drain out water
3. Replace the stopper properly after drainage is finished.
6. TECHNICAL SPECIFICATIONS
Cooling Capacity (Btu/h)/W
Heating Capacity (Btu/h)/W
Coefficient of Performance (COP) cool/heat
Dehumidifying Capacity (L/h)
Rated Cooling Power (W)
Rated Heating Power (W)
Air Flow Volume (m³/h)
Voltage / Frequency (V~/ Hz)
Noise Level dB (A)
Net Weight
Dimension
Refrigerant (g)
Approx room size (m²)
Miniature Fuse
IMPORTANT: DUE TO CONSTANT PRODUCT UPGRADES, WE RESERVE THE RIGHT TO
MAKE CHANGES WITHOUT PRIOR NOTICE. PLEASE REFER TO RATING LABEL

7. TROUBLE SHOOTING

Before requesting repair service, please check the following points
PROBLEM
The unit does not work
MODEL
(kg)
Body (mm)
Package (mm)
Accessories (mm)
PROBABLE CAUSES
Power supply fault
1. Not plugged in
Fig25
11000/2900
12000/3200
220-240/50
800×286×520
860×345×592
190×350×520
R410A (700g)
3.15A /250VAC
SUGGESTED SOLUTIONS
1. Plug in correctly
2.Change
- 20 -
AMB-12H
2.1/2.8
1.2
1200
1180
400
≤52
42
15~20
:
the
plug
or

Advertisement

loading

Related Products for Abatronic AMB-12H