Advertisement
Fig
23
Note:1) Use great care and avoid excessive pressure to avoid breakage of retaining clips.
2) Do not break filter when taking it out - use all possible care!
· Cleaning Filter: (Figure 24) Take water inlet filter in both hands and put into water. Gently
shake and turn filter until it is clean - do not use a lot of force, or stretch filter by two sides to
avoid any damage. If it can't be washed fully clean please change for a new one.
Note: After cleaning the filter, check it carefully and replace by new one if any rustiness or
breakage is apparent.
Gently wash water inlet water filter bracket and its inner and outer cover.
Reassemble filter by reversing the steps described for dismantling.
Notes:
1. Keep unit switched off and disconnected from mains before cleaning to avoid any
possibility of electric shock.
2. It is recommended that the filter is washed once every 2 months. If this is not done dust
may accumulate into filter which may lead to reduced air volume.
Unclip 4
retaining clips
Fig 24
- 19 -
Advertisement
