Platforms Supported; Notes For Upgrade - Avaya ERS 8600 Manual

Output is either:
FALSE - SNMPv2-SMI::enterprises.2272.1.4.41.0 = INTEGER: 2 (disabled)
TRUE - SNMPv2-SMI::enterprises.2272.1.4.41.0 = INTEGER: 1 (enabled)
In prior releases, the SNMP timer task could potentially crash if the SNMP retry counter is set to a value greater than zero
and multiple concurrent SNMP inform events are generated which do not receive an acknowledgement. While multiple
factors and conditions need to align in order to encounter this SNMP task crash, it was recommended to set the SNMP retry
count within the snmp-v3 target-address to zero in order to avoid the issue altogether. An example of such a configuration is
(see the bolded entry):
Config snmp-v3 target-addr create "NNM" 10.10.10.1:162
informTag mms 484
This is resolved in the 5.1.2.0 release, and the retry value can now be set to values greater than zero. (Q02052753)
Platforms Supported
All Ethernet Routing Switch 8600 modules are supported in the 8006, 8010, and 8010co Chassis. Full slot support for all
modules may be dependent on the presence of the High Performance (HP) Backplane. There is an orderable (and
chargeable) upgrade option for the HP Backplane.
The following modules are not supported in the 8003 chassis:

8692SF/CPU

All R/RS modules
NOTE: R/RS-series modules are supported in the 8010co chassis only with a High Performance Backplane installed.
Please refer to the following documents for extra details and as reference material in addition to this Readme:

Release Notes for the Ethernet Routing Switch 8600 Series Switch Software Release 5.1.0.0 (Doc # NN46205-402,
Rev 3.01)

Readme for Ethernet Routing Switch 8600 Series Switch Software Release 5.0.5.0. Release 5.1.2.0 has equivalent
CR fix functionality as Release 5.0.5.0.

Nortel Ethernet Routing Switch 8600 5.1 Upgrade Manual (Doc # NN46205-400, Rev 3.01)

Nortel Ethernet Routing Switch 8600 Installation – Modules, for Software Release 5.1 (Doc # NN46205-304, Rev
3.02)

Nortel Ethernet Routing Switch 8600 Administration, for Software Release 5.1 (Doc # NN46205-605, Rev 2.03)

Nortel Ethernet Routing Switch 8600 Routine Maintenance, for Software Release 5.1 (Doc # NN46205-312, Rev
2.01)
Notes for Upgrade
Please see Upgrade Guide and Release Notes for the Ethernet Routing Switch 8600 Series Switch Software Release
5.1.0.0 available at www.nortel.com/support.
NOTE: If upgrading to 5.1.4.0 code within any SMLT designed network from a release prior to 4.1.8.2 or 5.0.1.0, i.e. a
release which runs the 'older' SMLT architecture, then care should be taken to follow the proper upgrade steps. Please
review the 5.1.0.0 or the 5.0.1.0 Release Notes for specific details.
Use pursuant to the terms of your signed agreement or Avaya policy.
"TparamV2" tdomain ipv4_tdomain timeout 1500 retry 0 taglist
Avaya Inc. – Proprietary & Confidential.
7