Old Features Removed From This Release - Avaya ERS 8600 Manual

=======================================================================
SLPP Enhancement

Introduced New EtherType for SLPP PDU:
From this release EtherType 0x8104 is replaced by 0x8102 as the default EtherType for SLPP PDUs.
EtherType can still be configured through CLI. Old EtherType 0x8104 will be processed to handle the backward
compatibility and upgrade scenarios.
If the received ether type is old default ether type (0x8104 ) or current default ether type (0x8102) or currently
configured ethertype, then the packet is classified as SLPP PDU.
The Ethertype can be displayed using following existing CLI command.
CLI Command:
config slpp info
Sub-Context:
Current Context:
etherType (hex) :

Re-Arm per port SLPP PDU Receive Counter issue:
Currently per-port SLPP PDU receive counter is never reset, resulting in shutting down links wrongly after months
of running when the counter hit the pre-defined limit. This issue has been addressed in this release by resetting the
counter if the switch not received expected number of SLPP packets on the port in a certain period of time. This
timer is set to 24 hours.
Old Features Removed From This Release
None.
Use pursuant to the terms of your signed agreement or Avaya policy.
Vlacp Global Information
SystemId: 00:18:b0:5c:a0:00
Vlacp
Vlacp hold-time : 20
add :
0x8102
operation : disabled
tx-interval : 500
Avaya Inc. – Proprietary & Confidential.
: enable
SLPP
12