AEMC PowerPad III 8336 User Manual page 4

Viewing a Transient Detection Session
1. At the Detection Schedule screen, press the
For all other displayed screens, press the
Either action displays the Detection List screen.
2. If more than one transient detection recording is stored, use the arrows to select the
desired recording, then press
In the preceding illustration:
1 Location in the record of the zone
displayed.
2 Instantaneous value of the signals
according to the position of the cursor on
the scale. Use ◄ and ► to move cursor.
3 Move cursor to one period of the signal
before transient triggering time.
button.
button, and then select
to open it.
4 Move cursor to transient triggering time.
5 Number assigned to displayed graph (e.g.
6 Zoom In/Out
4
1 is highlighted indicating channel V1
triggered capture of the transient)
Transient.