Genelec F Two Operating Manual page 3

DIP SWITCH GROUP 1:
HT MODE
ISS SENSITIVITY LOW
ISS
LED OFF
OFF
ON
ANALOG AUDIO INPUTS:
RCA L AND R
3.5 MM STEREO JACK
LFE / LINK
Figure 2. Connectors and controls of the F Two.
OFF
ON
LEFT
OUT
L R
STEREO
IN
L R
Figure 3. Audio cabling
(.1) signal in a 2.1 or 5.1 channel sound
system or as the signal input in a multiple
subwoofer system (see chapter Using Mul-
tiple Subwoofers). The LFE/LINK input has
a 120 Hz low pass filter, so it is not suitable
for full frequency range signals.
AUDIO OUTPUT CONNECTORS:
XLR L AND R
RCA L AND R
RCA LINK
COAXIAL OPTICAL
DIGITAL AUDIO IN
LEFT RIGHT
OUT
L R LINK
ROLL OFF
4 dB SUBW LEVEL
2 dB
MAX MIN
OFF
STEREO
ON
90°
180° +10 dB
270° 10 dB
PHASE LINK LEVEL
IN
L R LFE/LINK
DIP SWITCH GROUP 2:
ROLL OFF
PHASE
LINK
SUBWOOFER LEVEL
LEVEL ROTARY ADJUSTMENT
MAINS INPUT
50 / 60 Hz 150 W
100 240 V~
COAXIAL OPTICAL
DIGITAL AUDIO IN
RIGHT
LINK
ROLL OFF
4 dB SUBW LEVEL
2 dB
MAX MIN
OFF
IR IN
SYSTEM
ON VOLUME
CONTROL
90°
SELECT
180° +10 dB
270°
10 dB
PHASE LINK LEVEL
LFE/LINK
Digital Input Connectors
The F Two has two digital signal input con-
nectors, one coaxial and one optical, that
accept stereo PCM format digital signal.
You can connect two digital sources and
switch between them using the Select
function.
DIGITAL AUDIO INPUTS:
RCA COAXIAL
TOSLINK OPTICAL
MAINS INPUT
50 / 60 Hz 150 W
100 240 V~
IR IN
SYSTEM
VOLUME
CONTROL
SELECT
SYSTEM VOLUME
CONTROL CONNECTOR
POSSIBLE ADDITIONAL SUBWOOFER.
USE THE LFE/LINK INPUT AND SET THE
"LINK" DIP SWITCH TO "ON".
DIGITAL SIGNAL
TV, STREAMER, SOUND CARD ETC.
GIZM O
ANALOG SIGNAL
PHONE, COMPUTER, AV REVEIVER ETC.
The F Two has two pairs of analog stereo
L/R output connectors, one with RCA con-
nectors and the other with balanced XLR
male connectors. Connect signal cables
from these connectors to the main speak-
ers. Both connector pairs carry the same
MAINS INPUT
IR IN CONNECTOR
POWER BUTTON
SELECT BUTTON
SOURCES:
Tuner 87.5 MHz
SOURCES:
Analog Output Connectors