G Threes. Linked together shown in figure 1. This strip insulates the two F Two’s can also be used with G Fours. battery from the contacts on the remote Figure 1. Removing the battery insulating strip from the remote control The F Two extends the system’s bass...
Page 3
PHASE LFE / LINK LINK SUBWOOFER LEVEL LEVEL ROTARY ADJUSTMENT Figure 2. Connectors and controls of the F Two. POSSIBLE ADDITIONAL SUBWOOFER. USE THE LFE/LINK INPUT AND SET THE ”LINK” DIP SWITCH TO ”ON”. DIGITAL SIGNAL SOURCES: TV, STREAMER, SOUND CARD ETC.
Page 4
Functions And Controls IR IN Connector switch to “ON” reduces the triggering sen- If the F Two is used with an infrared type sitivity of the function. HT Mode remote control (see chapter Use with IR Remote Controls) and the desired location Turn this switch to “ON”...
Alternatively, the subwoofer can be acti- function can be disabled by setting the factory settings by keeping it depressed for vated by pushing any button on the remote “ISS” switch to the “OFF” position. Then 10 - 15 seconds. This returns the volume control.
The remote controls delivered with F Two is automatically set to maximum and the “slave” subwoofer only reacts to the power switch to the opposite set- subwoofers will function with any other F Two 90° on/off commands given with a remote ting.
Safety Considerations tact with the antenna during normal opera- The Genelec F Two complies with interna- tion is minimized. radio/TV technician for help. tional safety standards. However, to ensure...
Page 8
2 dB steps Phase matching control in 90° steps From 0 to -270° @ 85 Hz www.genelec.com Genelec Document D0164R001. Copyright Genelec Oy 5.2019. All data subject to change without prior notice International enquiries: In China please contact: In Sweden please contact In the U.S.
Need help?
Do you have a question about the F Two and is the answer not in the manual?
Questions and answers