Connections; Connecting The Dab/Fm Aerial; Speaker Connections - JVC UX-D427S Instruction Manual

Connections

Connecting the DAB/FM Aerial

Fully extend the DAB / FM aerial. Connect the supplied DAB / FM aerial to the DAB / FM
antenna socket on the rear of the unit by turning the antenna screw cap clockwise.
Rear View of the Main Unit

Speaker Connections

1. Connect the speaker cables between the terminals as shown below.
2. Connect the red/black speaker cables to the red terminal heads (+) and silver speaker
cables to the black terminal heads (-).
Rear View of
the Speaker
How to Connect
• For the main unit, turn the terminal cap counterclockwise to loosen it.
• Insert the wire into the terminal fully.
• Turn the terminal cap clockwise to securely connect it.
• For the speaker terminals, press and hold down the terminals while inserting the wires.
Release the terminal cap when the wires are inserted.
Connecting the speaker cable to the wrong terminal will cause the sound to go out of phase.
12
• Do not overtighten, this could damage the aerial.
• To avoid noise, keep aerial away from the unit, the
connecting cables and the mains cable.
Rear View of the Main Unit
Rear View of
the Speaker