Bissell 1699 SERIES - 120V User Manual page 22

Troubleshooting Continued
BISSELL Consumer Services
For information about repairs or replacement parts, or questions about
your warranty, call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday
Saturday
Or write:
BISSELL HOMECARE, INC
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of unit available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It provides proof of date of
purchase in the event of a warranty claim. See "About Your Warranty"
on page 24 for details.
Please do not return this product to the store.
22
Cleaner not picking up solution.
Possible Causes
Ready Tools dial may be at the
wrong setting for the cleaning job.
Nozzle Window may not be
properly attached.
Tank-in-Tank lid is not
properly installed.
Tank-in-Tank is not properly seated. Tank-In-Tank must be firmly seated to
Poor tool position.
(Hand held attachments only).
Tank-in-Tank has picked up
maximum dirty water.
8 a.m. — 9 p.m. EST
9 a.m. — 5 p.m. EST
Remedies
Set ReadyTools dial to either Tools or
PreTreat or Floor Cleaning.
Press down firmly on the black oval
gasket at the top window to make sure
the two tabs on the back of the Nozzle
Window are snapped into the mating
slots in the main housing.
Re-install lid; refer to the Features
section.
function; remove and reseat Tank-in-Tank.
Adjust angle; apply more downward
pressure.
Empty Tank-in-Tank, refer to
the Features section.