Safety Information; Safety And General Precautions - Siemens SITRANS WW300 Operating Instructions Manual

Safety information

2.1

Safety and general precautions

ALWAYS STOP the belt, lock-out, and/or place a "Do Not Energize" tag on the main
disconnect before working on or around the weighfeeder.
Always follow established safe operating practices when working on or around the
weighfeeder, especially in wet environments and when adjacent to conductive steel
mounting framework.
Note
A weighfeeder can be dangerous. Pinch points exist along the conveyor belt line.
Secure the weighfeeder when:
• replacing the belt
• working on or around the load cell(s)
• working on or around the speed sensor
• working on or around the drive components
• working on or around the motor
SITRANS WW300
Operating Instructions, 05/2015, A5E33560691-AB
WARNING
WARNING
2
7