CONTROLLER
AC Smart Setup
AC Smart Setup
Only AC Smart 5 or later must be used with CAREL controller. AC Smart 4 is not compatible with CAREL
controller.
1. Confirm control wiring between rooftop unit CAREL controller and AC Smart 5 Channel 1 (Wiring is 18
AWG, 2-conductor, twisted, stranded, shielded, and must comply with all applicable local and national
codes.).
Figure 62: DOAS Controller to AC Smart 5 Connections.
2. On the CAREL controller, under "Network Settings" set the Device I.D. as:
• For AR-DE DOAS models: CAREL Device I.D. = 17 (Decimal) and AC Smart Address = 11 (Hex)
• For AR-DR DOAS models: CAREL Device I.D. = 18 (Decimal) and AC Smart Address = 12 (Hex)
Figure 64: Device I.D. Screen.
114
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Figure 63: AC Smart 5.