Table of Contents
Advertisement
Quick Links
NOTE:
Please read all instructions
carefully before using this
product
Table of Contents
Safety Notice
Hardware Pack
Assembly Instruction
Parts List
Warranty
Ordering Parts
Model
NS-908UP
Retain This
Manual for
Reference
150206
OWNER'S
MANUAL
MARCY
Magnetic-Resistance
Upright Bike/Hand Pulse
NS-908UP
IMPEX
2801 S. Towne Ave., Pomona, CA 91766
Tel: (800) 999-8899 Fax: (626) 961-9966
www.impex-fitness.com
info@impex-fitness.com
®
®
INC.
Advertisement
Table of Contents
Related Manuals for Impex NS-908UP
Summary of Contents for Impex NS-908UP
- Page 1 Please read all instructions carefully before using this product ® MARCY Table of Contents Safety Notice Magnetic-Resistance Hardware Pack Upright Bike/Hand Pulse Assembly Instruction NS-908UP Parts List Warranty Ordering Parts Model NS-908UP Retain This Manual for Reference 150206 OWNER'S MANUAL ®...
-
Page 2: Table Of Contents
ORDERING PARTS..................….. BEFORE YOU BEGIN ® Thank you for selecting the MARCY NS-908UP Magnetic Upright Bike with ® Hand Pulse by IMPEX INC. For your safety and benefit, read this manual carefully before using the machine. As a manufacturer, we are committed to provide you complete customer satisfaction. -
Page 3: Important Safety Notices
OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC. ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT. SAVE THESE INSTRUCTIONS. -
Page 4: Warning Label Placement
WARNING LABEL PLACEMENT The Warning Label shown here has been placed on the Rear Stabilizer. If the label is missing or illegible, please call customer service at 1-800-999-8899 for replacement. Apply the label in location shown. Impex Inc. www.impex-fitness.com... -
Page 5: Hardware Pack
Allen Bolt M8 x 5/8” Allen Bolt M8 x 1 1/8” Allen Wrench Crossing Wrench You need above hardware to assemble this machine. Before start to assemble, please check the hardware pack to make sure they are all included. Impex Inc. www.impex-fitness.com... -
Page 6: Pre-Assembly Check List
PRE-ASSEMBLY CHECK LIST NO.1 NO.15 NO.22 NO.3 NO.18 NO.16 NO.9/10 NO.19 NO.2 Impex Inc. www.impex-fitness.com... -
Page 7: Assembly Instructions
2 3/8” Carriage Bolts (#6), two Ø 5/8” Curved Washers (#7), and two M8 Acorn Nuts (#8). B.) Attach the Rear Stabilizer (#2) to Main Frame. Secure them together with two M8 x 2 3/8” Carriage Bolts (#6), two Ø 5/8” Curved Washers (#7), and two M8 Acorn Nuts (#8). DIAGRAM 1 Impex Inc. www.impex-fitness.com... - Page 8 D.) Drop down the Upper Tension Cable so the fitting sits firmly on top of the bracket. E.) Secure the Front Post to the Main Frame with four M8 x 5/8” Allen Bolts (#17) and four Ø 5/8” Curved Washers (#7). DIAGRAM 2 Impex Inc. www.impex-fitness.com...
- Page 9 Pulse Sensor Wire out of Front Post. Connect Upper Computer Wire from Computer (#18) to the Upper Computer Wire (#24). C.) Attach the Computer (18) to the Front Post (#22) with two M5 x ⅜” Philips Screws which are pre-assembled on Computer . DIAGRAM 3 Impex Inc. www.impex-fitness.com...
- Page 10 Washers (#12), three Ø 5/8” Lock Washers (#13), and three M8 Nylon Nuts (#14). C.) Insert the Seat Post into the opening on Main Frame (#1). Thread the Quick Release Knob (#11) through the hole on Seat Post to securely lock it at selected height. DIAGRAM 4 Impex Inc. www.impex-fitness.com...
- Page 11 STEP 5 (See Diagram 5) A.) Thread the Left Pedal (#9) counterclockwise into the Crank (#27). B.) Thread the Right Pedal (#10) clockwise into the Crank on the other side. DIAGRAM 5 Impex Inc. www.impex-fitness.com...
-
Page 12: Exploded Diagram
NS-908UP EXPLODED DIAGRAM Impex Inc. www.impex-fitness.com... -
Page 13: Computer
NS-908UP PARTS LIST PART NO. DESCRIPTION SPEC. QUANTITY Main Frame Rear Stabilizer Front Stabilizer Front Stabilizer End Cap Rear Stabilizer End Cap Carriage Bolt M8 x 2 3/8” Curved Washer Ø 5/8” Acorn Nut Left Pedal Right Pedal Quick Release Knob Washer Ø... - Page 14 NS-908UP COMPUTER FUNCTIONAL BUTTON: MODE/RESET – Push down to select functions. -Push down to reset time, distance and calories for 3 seconds. 1. SCAN: Press MODE button until “▼” appears at SCAN position, monitor will rotate through the following functions: time, speed, distance and calorie, each display will be hold 4 seconds.
-
Page 15: Maintenance And Storage
Release Knob to hold the Seat at selected height. 3. The seat adjustment is in approximately 1 1/8” increment. TRANSPORT The Bike has a pair of Roller Caps on Front Stabilizer. To move, carefully raise the Handle and Rear Stabilizer up from floor, and roll. Impex Inc. www.impex-fitness.com... -
Page 16: Exercise Instructions
The rate of work should be sufficient to raise your heartbeat into the target zone shown on the graph below. This stage should last for a minimum of 12 minutes though most people start at about 15-20 minutes Impex Inc. www.impex-fitness.com... -
Page 17: Weight Loss
The important factor here is the amount of effort you put in. The harder and longer you work the more calories you will burn. Effectively this is the same as if you were training to improve your fitness, the difference is the goal. Impex Inc. www.impex-fitness.com... -
Page 18: S. Towne Ave., Pomona, Ca
IMPEX authorized service center or for products used for commercial or rental purposes. No other warranty beyond that specifically set forth above is authorized by IMPEX.