Steps
1
Using the alignment post, place the power button with optional fingerprint reader on the palm-rest and keyboard assembly.
2
Replace the two screws (M1.2x2) to secure the power button with optional fingerprint reader to the palm-rest and keyboard assembly.
Next step
1
Install the
I/O
board.
2
Install the
GPU
fan.
3
Install the
WLAN
card.
4
Install the battery.
5
Install the
base
cover.
6
Follow the procedure in
Power-adapter port
Removing the power-adapter port
Prerequisites
1
Follow the procedure in
2
Remove the
base
cover.
3
Remove the battery.
About this task
The figure indicates the location of the power-adapter port and provides a visual representation of the removal procedure.
After working inside your
computer.
Before working inside your
computer.
Disassembly and reassembly
47