Removing the power button and optional fingerprint reader
Prerequisites
1
Follow the procedure in
2
Remove the
base
cover.
3
Remove the battery.
4
Remove the
WLAN
card.
5
Remove the
GPU
fan.
6
Remove the
I/O
board.
About this task
The figure indicates the location of the power button with optional fingerprint reader and provides a visual representation of the removal
procedure.
Steps
1
Remove the two screws (M1.2x2) that secure the power button with optional fingerprint reader to the palm-rest and keyboard
assembly.
2
Lift the power button with optional fingerprint-reader, along with the fingerprint reader cable, off the palm-rest and keyboard
assembly.
Installing the power button with optional fingerprint reader
Prerequisite
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the power button with fingerprint reader and provides a visual representation of the installation
procedure.
46
Disassembly and reassembly
Before working inside your
computer.