Ceiling Mount - Adaptive Micro Systems BetaBrite 1036 Programming Manual

Ceiling mount

Counter mount
Lock
Bracket
washer
Screw
Washer
Introduction: Installation
1. Attach the ceiling brackets to the sign using the screws supplied.
2. Hang the sign from the ceiling using mounting chains and ceiling
hooks (not supplied). The chains and hooks must be able to support at
least four times the weight of the sign.
3. Plug the power cord into the sign and into a nearby outlet.
Ceiling bracket
This mounting chain and ceiling hook (not supplied) must
be able to support at least four times the weight of the sign.
1. Attach the mounting brackets to the counter, 24 5/8 inches (62.7 cm)
on center.
2. Plug the power cord into the sign.
3. Attach the sign to mounting brackets using hardware as shown.
NOTE: On the end with the power cord, use the spacer provided,
not a washer.
4. Plug the power cord into an outlet.
Front view
X
Side view
X
Ceiling
Power cord
Top view
BETA BRITE Programming Manual
Top view
Lock
Bracket
washer
Spacer
Front
view
Screw
3