Setting A Sign's Time And Date - Adaptive Micro Systems BetaBrite 1036 Programming Manual

BETA BRITE Programming Manual

Setting a sign's time and date

The sign will keep the time and date once they have been set, so long
as the sign isn't unplugged or interrupted by a power loss, .
NOTE: Because the BetaBrite
the date function can not be updated when power is off. The
date and time must be re-programmed whenever the sign
loses power for any reason.
Step When you do this...
1 Press PROGRAM.
2 Press BACK until SET TIME appears.
3 Press ADV.
Press D to set the day of the week.
Press H to set the hour.
Press M to set the minute.
4
NOTE:Press SELECT, to change from 12-hour
(AM/PM) to 24-hour mode (0 - 23).
5 Press BACK until SET DATE appears.
6 Press ADV.
Press D to set the day.
Press M to set the month.
Press Y to set the year.
7
NOTE:Press SELECT to display the date in
different formats—for example, JAN 19,
2006 or 1/19/06, or 19/1/06, etc.
After setting the date and time, press RUN twice to return to normal operation.
8
NOTE:Date and Time will not appear on the screen after you have returned to normal operation.
8
®
sign does not have a real-time clock,
PROG TEXT A
MON 2:29 AM
TUE 11:21 AM
SET WITH D,M,&Y
JAN. 19, 2006
Basic sign operation: Setting a sign's time and date
You see this...
SET TIME
SET W/D, H&M
THEN
SET DATE
THEN
1/19/06