Example 2 - Displaying Messages In File Name Order (A, B, C, Etc.) - Adaptive Micro Systems BetaBrite 1036 Programming Manual

BETA BRITE Programming Manual
Example 2 — Displaying messages in file name order (A, B, C, etc.)
Once you've programmed messages into the sign, you may want to
set the order or sequence in which messages appear.
In this example, we'll display messages by their file name (A, B, C,
etc.) or in alphabetical order.
Step When you do this...
This example assumes that there are two messages (files A and B) in the sign:
1 Press PROGRAM.
2 Press RUN.
If RUN appears on the sign,
go to the next step.
3
Otherwise, press SELECT
until RUN appears.
4 Press B.
5 Press RUN.
Next, we'll program the sign to display message B and then message A.
6 Press PROGRAM.
7 Press RUN.
14 Beginning text messaging: Example 2 — Displaying messages in file name order (A, B, C, etc.)
This example continues where Example 1 left off.
File A = THIS IS YOUR FIRST MESSAGE
File B = This is your second message
You have just programmed the sign to run only message file B.
You see this...
PROG TEXT B
RUN
TIME or DEMO may also appear here.
RUN
RUN
This is your
THEN
second
THEN
message
PROG TEXT A
RUN
B