What To Do When You Forget A Sign's Password; How To Delete A Sign's Password; Sound Control - Adaptive Micro Systems BetaBrite 1036 Programming Manual

What to do when you forget a sign's password

Step When you do this...
1 Press PROGRAM.
2 Press Shift and L six times.
3 Enter a new password.

How to delete a sign's password

If you no longer want to be prompted to password protect a sign, you
must clear the sign's memory in order to delete the password. To do this,
see "Clearing a sign's memory" on page 9.

Sound control

Normally, when you press a Remote Control key while programming
a sign, the sign will beep.
If you want to turn the beeping off, hold down
. (To turn the beeping on again, repeat this.)
FONT
Basic sign operation: Sound control
BETA BRITE Programming Manual
You see this...
ENTER PASSWORD
******
CORRECT
THEN
PROG TEXT A
and then press
FCN
11