ABB ACS800 Series Hardware Manual page 8

8
WARNING! Ignoring the following instructions can cause physical injury or death, or
damage to the equipment.
•
•
•
•
Safety instructions
Use extreme caution when manoeuvring a converter or filter module that runs
on wheels. The modules are heavy and have a high center of gravity. Make
sure that the module does not topple over when you move it on the floor.
Support bottom of module
Extend the support legs of the converter
module outside the cabinet!
Beware of the cooling fan blades. The fans can continue to rotate for a while
after the disconnection of the electrical supply.
Beware of hot surfaces. Some parts inside the converter cabinet, such as
heatsinks of power semiconductors, remain hot for a while after the
disconnection of the electrical supply.
Make sure that dust from drilling does not enter the converter when installing.
Electrically conductive dust inside the unit may cause damage or lead to
malfunction.
Do not tilt!
Lift the module by the upper part only using
the lifting hole(s) at the top!