iOptron CEM40EC Quick Start Manual
Center-balanced goto equatorial mount
Hide thumbs
Also See for CEM40EC:
- Instruction manual (60 pages) ,
- Quick start manual (7 pages) ,
- Quick start manual (6 pages)
Advertisement
Quick Links
Quick Start Guide
CEM40™ Center‐balanced GoTo Equatorial Mount
Models: CEM40 (#7400A series) & CEM40EC (#7400ECA series)
1
PACKAGE CONTENTS
Mount head – with iPolar
Hand Controller (HC) – Go2Nova® 8407+
Counterweight – 10 lbs (4.5 kg)
Stainless steel counterweight shaft
GPS module
RJ11 coiled cables, x2
RS232‐RJ9 serial cable
USB cable
AC adapter – 100‐240V (DC output 12V/5A)
Alignment peg (located in mount head package)
1.5" tripod and Accessory Tray (tray located in mount head package)
Hard case (for 7400ECA, optional for 7400A)
Quick Start Guide (this document)
ONLINE RESOURCES (at www.iOptron.com, under Support)
User's Manual
Hand controller and mount firmware upgrades (check online for the latest version)
ASCOM and Commander for computer control
1
The design, contents and packaging may change from time to time without notice.
TM
electronic Polar Scope
iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | www.iOptron.com
1
Advertisement
Related Manuals for iOptron CEM40EC
Summary of Contents for iOptron CEM40EC
- Page 1 RJ11 coiled cables, x2 RS232‐RJ9 serial cable USB cable AC adapter – 100‐240V (DC output 12V/5A) Alignment peg (located in mount head package) 1.5” tripod and Accessory Tray (tray located in mount head package) Hard case (for 7400ECA, optional for 7400A) Quick Start Guide (this document) ONLINE RESOURCES (at www.iOptron.com, under Support) User’s Manual Hand controller and mount firmware upgrades (check online for the latest version) ASCOM and Commander for computer control The design, contents and packaging may change from time to time without notice. iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | www.iOptron.com ...
- Page 2 Adjustment Screws from both sides to leave ample Lat. Adj. Knob space for the alignment peg to fit in between the 2 Azi Adjustment Screws. Remove the 2x Azi Locking iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | www.iOptron.com ...
- Page 3 (<10°), a special CW mounting house is or a Losmandy‐D plate by flipping both locking sides. needed. (Contact iOptron for more information) This unique adjustable dovetail saddle enables centering the scope to the center of the saddle. The following graphics show how to change the dovetail saddle to fit either Vixen or Losmandy plate. iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | www.iOptron.com ...
- Page 4 electronic polar scope. To perform equipment damages. polar alignment, please refer to CEM40 User’s Manual, or iPolar Operation Manual from iOptron’s website, or steps briefly outlined below: iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | www.iOptron.com ...
- Page 5 Disengage the gear beep). If the GPS is “OK’d” during setup, just power system for transportation. cycle the mount. Double check the HC display and it should show correct local time. Please contact support@ioptron.com for technical support. iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | www.iOptron.com ...
-
Page 6: Ioptron Two Year Telescope, Mount, And Controller Warranty
A. iOptron warrants your telescope, mount, or controller to be free from defects in materials and workmanship for two years. iOptron will repair or replace such product or part which, upon inspection by iOptron, is found to be defective in materials or workmanship. As a condition to the obligation of iOptron to repair or replace such product, the product must be returned to iOptron together with proof-of- purchase satisfactory to iOptron.
Need help?
Do you have a question about the CEM40EC and is the answer not in the manual?
Questions and answers