Advertisement
Quick Links
Quick Start Guide
CEM120™ Center‐Balanced GoTo Equatorial Mount
Models: #7300, #7301, #7302
1
PACKAGE CONTENTS
1X Telescope mount
1X Hand controller (HC) – Go2Nova® #8407
1X Counterweight (10 kg/22 lbs)
1X Stainless steel counterweight shaft (4.6kg)
1X HC controller cable
1X RS232‐RJ9 serial cable
1X 12V5A AC adapter – 100‐240V
4X Base mounting screws
1X GPS external antenna
1X Wi‐Fi external antenna
Quick Start Guide (this document)
ONLINE RESOURCES (at www.iOptron.com, under "Support")
User's Manual
Tips for set up and using the products
Hand controller and mount firmware upgrades (check online for the latest version)
1
The design and packaging may change from time to time without notice.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for iOptron CEM120 7300
Summary of Contents for iOptron CEM120 7300
- Page 1 Quick Start Guide CEM120™ Center‐Balanced GoTo Equatorial Mount Models: #7300, #7301, #7302 PACKAGE CONTENTS 1X Telescope mount 1X Hand controller (HC) – Go2Nova® #8407 1X Counterweight (10 kg/22 lbs) 1X Stainless steel counterweight shaft (4.6kg) 1X HC controller cable 1X RS232‐RJ9 serial cable 1X 12V5A AC adapter – 100‐240V 4X Base mounting screws 1X GPS external antenna 1X Wi‐Fi external antenna Quick Start Guide (this document) ONLINE RESOURCES (at www.iOptron.com, under “Support”) User’s Manual Tips for set up and using the products Hand controller and mount firmware upgrades (check online for the latest version) The design and packaging may change from time to time without notice. ...
- Page 2 Read the Instruction BEFORE setting up and using the mount! Worm/gear system damage due to improperly use will not be covered by warranty. Questions? Contact us at support@ioptron.com Instruction for CEM120 Gear Switch and Axle Locking Knob Both RA and DEC have the same Gear Switch and Axle Locking Knob, the operations are the same.
- Page 3 Screw to hold the CW in place. Place the Safety Cap back onto the shaft. You may need more CW for heavier payload, or smaller size CW for lighter scope. 3. Setting the Latitude: Loosen the Latitude Locking Clamps about a quarter (1/4) turn with a 5mm Allen wrench. iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | www.iOptron.com ...
- Page 4 Time using arrow and number keys. Enter the time its shaft. zone offset to the UTC; for examples: Only balance one axis at a time and start with the Boston is “UTC ‐300 minutes” DEC axis first. Double check the mount to make sure Los Angeles is “UTC ‐480 minutes” both the RA and DEC axes are balanced. Rome is “UTC +060 minutes” iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | www.iOptron.com ...
- Page 5 Axel Locking Knobs to lock accuracy, refer to the full User’s Manual for more position and the Gear Switches are unlocked. details. 12. Go to an Object: The mount is now ready for GOTO support@ioptron.com for technical support. and tracking targets. Press MENU, select and ENTER iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | www.iOptron.com ...
-
Page 6: Ioptron Two Year Telescope, Mount, And Controller Warranty
A. iOptron warrants your telescope, mount, or controller to be free from defects in materials and workmanship for two years. iOptron will repair or replace such product or part which, upon inspection by iOptron, is found to be defective in materials or workmanship. As a condition to the obligation of iOptron to repair or replace such product, the product must be returned to iOptron together with proof-of- purchase satisfactory to iOptron.
Need help?
Do you have a question about the CEM120 7300 and is the answer not in the manual?
Questions and answers