Advertisement
GUARANTEE - This instrument carries a one-year
guarantee against defects in either components
or workmanship. During this period, products
that prove to be defective will, at the discretion
of ETI, be either repaired or replaced without
charge. This guarantee does not apply to sensors/
probes, where a six-month period is offered.
The product guarantee does not cover damage
caused by fair wear and tear, abnormal storage
conditions, incorrect use, accidental misuse,
abuse, neglect, misapplication or modification.
In line with our policy of continuous
development, we reserve the right to amend our
product specification without prior notice.
MAXIMUM OVERPRESSURES -
Model
Order code
9202
825-902
9205
825-905
9215
825-915
9230
825-930
9275
825-975
Please note: These instruments feature over pressure
protection to at least twice the measuring capacity. If
subjected to more than the specified maximum over
pressure, damage is likely to occur.
Instrument range
psi
mbar
±2
±137.9
±5
±344.7
±15
±1034
±30
±2068
±75
±5171
9200 Series
Manometer &
Pressure Meters
Operating Instructions
Advertisement
Table of Contents
Related Manuals for ETI 9200 Series
Summary of Contents for ETI 9200 Series
-
Page 1: Operating Instructions
During this period, products that prove to be defective will, at the discretion of ETI, be either repaired or replaced without charge. This guarantee does not apply to sensors/ probes, where a six-month period is offered. - Page 2 This instrument only measures dry non-corrosive gases; it will not measure water or other fluids. The 9200 Series of Manometer & Pressure Meters can measure differential measurements when using both inputs, using the tubes and quick connectors supplied.
Need help?
Do you have a question about the 9200 Series and is the answer not in the manual?
Questions and answers