Page 1
8500 CONDUCTIVITY METER Operating Instructions...
Page 2
Press and hold the ‘MODE’ button for 3 seconds to switch between the different scales whilst in TDS mode. The ETI solution (816-071) has a ppm scale of 700. ATC – ATC stands for Automatic Temperature Compensation. This meter is fixed with an ATC value of 2%/°C.
Page 3
Please note: Calibration should be carried out regularly to ensure best accuracy. If measuring any liquid, simply remove the cap and place the electrode directly into the solution. Alternatively, if measuring the EC or TDS of soil, take a sample of the soil and extract the water from it into the cap of the electrode.
Page 4
During this period, products that prove to be defective will, at the discretion of ETI, be either repaired or replaced without charge. This guarantee does not apply to probes, where a six-month period is offered. The product guarantee does not cover damage caused by fair wear and tear, abnormal storage conditions, incorrect use, accidental misuse, abuse, neglect, misapplication or modification.
Need help?
Do you have a question about the 8500 and is the answer not in the manual?
Questions and answers