Acquisition And Transfer Control Feature Descriptions; File Access Control Category; File Access Control Feature Descriptions - Teledyne Linea ML ML-FC-08K10T Manual

Acquisition and Transfer Control Feature Descriptions

Display Name Feature
Acquisition Mode AcquisitionMode
Continuous
Acquisition Start AcquisitionStart
Acquisition Stop AcquisitionStop
Acquisition Status AcquisitionStatus

File Access Control Category

The File Access control in CamExpert allows the user to quickly upload and download various data
files to/from the connected the camera. The supported data files for the camera include firmware
updates and Flat Field coefficients.
Note that the communication performance when reading and writing large files can be improved by
stopping image acquisition during the transfer.

File Access Control Feature Descriptions

Display Name Feature
File Selector FileSelector
Device Firmware

62
Description
The device acquisition mode defines the number of frames to
capture during an acquisition and the way it stops
Only continuous mode is currently available
Commands the camera to start sending image data. (WO)
Commands the camera to stop sending image data at the end
of the current line (WO)
Indicates whether the camera has been commanded to stop or
to send image data.
Figure 23: File Access Control Panel
Description
Selects the file to access. The files which are accessible are
listed in the XML:
Upload micro code, FPGA code & XML as a single file to the
camera which will execute on the next camera reboot cycle.
Device Version
& View
1.00
Beginner
DFNC
1.00
Beginner
DFNC
1.00
Beginner
DFNC
1.00
Beginner
DFNC
Appendix A: GenICam Commands
View
1.00
Beginner
DFNC