Step 2: New Addressing Process; Step 3: Check Grouping And Change If Necessary - B.E.G. LUXOMAT PD4-M-HCL-FC Application Description

PD4-M-HCL 93006/93007

7.2. Step 2: New addressing process

7.3. Step 3: Check grouping and change if necessary

Important note for slave operation: connect slave devices only
after setting up addressing, or else ensure that, while auto-
addressing takes place (all LEDs blinking quickly), no-one remains
in any slave device's detection area, so that no motion detection
events are sent to the master.
50570_V1_Operation_Manual_PD4-M-
HCL_93006_93007_EN_080818 Page 9 / 10