Dali Groups 4: Lighting Zone B; Orientation Light; Relay; Smartphone App Commands - B.E.G. LUXOMAT PD4-M-HCL-FC Application Description

PD4-M-HCL 93006/93007
Soft Start
Dim up to LUX set value for lighting zone A
and broadcast

5.6. DALI groups 4: lighting zone B

Automatic
The operation mode of the detector can be
selected. FULL: In this operating mode, the
lighting switches automatically on and off
for increased comfort, depending on
presence and brightness. SEMI: In this
operating mode, the light turns on only after
a manual switching, for an increased savings
success. Switching off is automatically or
manually.

5.7. Orientation Light

Follow-up Time
The time period starts after the main light is
switched off and defines the duration for the
orientation light to stay on.
Brightness value
This value defines the brightness of the
orientation light.

5.8. Relay

Automatic
The operation mode of the integrated relay
can be selected
•
Cut off: Power consumption of EBs in
standby is minimised.
HVAC: Upon detected movement, the
interface is switched on for the
selected follow-up time
(brightnessindependent).
•
CdS: Der Melder schaltet das Licht
bewegungsunabhängig bei
Unterschreiten der eingestellten
Einschaltschwelle ein. Abhängig von der
eingestellten Einschaltschwelle ist eine
Ein-/Ausschaltverzögerung aktiv.
•
Zone C: The interface behaves the same
as DALI group 4.
•
Off: no function
Follow-up Time
This time period starts upon detected
movement and defines the duration for the
connected load to stay on.
50570_V1_Operation_Manual_PD4-M-
HCL_93006_93007_EN_080818

6. Smartphone App Commands

6.1. DALI

Open DALI
Starts DALI configuration mode
Close DALI
Finished DALI configuration mode
BROADCAST RESET
Sets the DALI ballasts to default values
(except short address). Recommended
before carrying
procedure.
NEW
Applies to all connected DALI ECG: Deletes
old addressing / groupings launches new
auto-addressing,
automatically to the group assignment
process.
Add
Only applies to all connected, factory-new
DALI ECG (Factory-new = With short address
"FF"): Starts Auto-addressing, then switches
automatically to the group assignment
process.

6.2. DALI group assignment

Previous
Starts group assignment process of all
addressed DALI ECG
In the group assignment process:
Finds previous DALI ECG to be grouped.
Next
Starts group assignment process of all
addressed DALI ECG
In the group assignment process:
Find the next to be grouped DALI ECG
out an addressing
then switches
Page 7 / 10