Led Indication; Bidirectional Smartphone App; Preparing Smartphone (Android Samsung, Ios); Preparing Ir-Adapter - B.E.G. LUXOMAT PD4-M-HCL-FC Application Description

PD4-M-HCL 93006/93007

3. LED Indication

Nr. Indication
1 Self-test cycle
(factory setting)
2 Self-test cycle
(not programmed)
3 Self-test cycle
(programmed via IR)
4 Self-test cycle
(not programmed +
double locked)
5 Self-test cycle
(programmed via IR +
double locked)
6 Too bright
7 IR signal OK
8 DALI configuration
mode / grouping
process
9 DALI autoaddressing
10 Broadcast mode
11 Unlocked (parameters
+ commands)
12 Movement detected

4. Bidirectional Smartphone App

4.1 Preparing smartphone (Android Samsung, iOS)

Please install the app "B.E.G. BiRC", available in the respective
App Store. Depending on the end device it can be necessary to
update the operating system. For current system requirements
see application description.

4.2. Preparing IR-Adapter

The IR-Adapter has an integrated rechargeable battery for power
supply. Please charge the adapter first by means of the micro USB
cable (included in delivery). The battery being charged. The red
LED switches off when battery is full.
50570_V1_Operation_Manual_PD4-M-
HCL_93006_93007_EN_080818
white green red
Blinking Blinking Blinking
- - Blinking
- - Fast
blinking
- Blinking -
- Fast -
blinking
- Blinking -
Short - -
ON
ON ON ON
Fast Fast Fast
blinking blinking blinking
ON - -
- ON -
- - Short
ON

4.3. Connect Adapter with smartphone

Plug the adapter in to the audio socket of your Smartphone or
tablet. You must ensure that the IR-Adapter is fully inserted into
the socket.
Please note that covers or cases may partially block a correct
insertion of the adapter into the audio socket.
Set the volume of the audio socket to maximum in order to
ensure a sufficient transmission range of the IR signal.

5. Smartphone App Parameters

5.1. General

LEFT BUTTON
Select function of the right button
READ OUT
Read out bidirectional product
SEND
Send selected parameters to the device
SEND ALL
Send all parameters to the device
(PLEASE NOTE: all set parameters will be
overwritten,
threshold)

5.2. Device

Software Version
Device PIN
Lock device
DALI Address
Sensitivity
A high (detection) sensitivity being selected,
even smaller movements will be detected
and larger surfaces will be monitored.
Reflection factor
e.g. also the brightness
Page 5 / 10