System Connections; System Connection Via A Lan - Sony PCS-11 Operation Manual

System Connections

This section describes the typical system connections.
Notes
• Be sure to turn off all the equipment before making any connections.
• Do not connect/disconnect the camera cable with the power on. Doing so may damage
the Camera Unit or Communication Terminal.
• For safety, do not connect the 100BASE-TX/10BASE-T connector to a network that
applies an excess voltage via the 100BASE-TX/10BASE-T connector.

System Connection via a LAN

PCS-P11/P11P
Communication
Terminal
AUDIO OUT
(MIXED)
VIDEO OUT
AUX MAIN– MONITOR– SUB
to AUDIO
OUT
Audio
connecting
cable*
* supplied
** not supplied
18
GB
System Connections
PCS-C11/C11P Camera Unit
TERMINAL VISCA OUT
to TERMINAL
Camera cable*
to CAMERA UNIT
VIDEO IN AUDIO IN CAMERA UNIT MIC
AUX1– –AUX2
(PLUG IN POWER)
1 2
100BASE-TX
10BASE-T
IR OUT
1 2
to VIDEO
OUT
MONITOR to 100BASE-TX/
10BASE-T
MAIN
UTP cable (category 5, straight)**
S-video
connecting
cable*
to S-video
input
to audio input
ISDN UNIT
DC 19.5V
to DC19.5V
PCS-AC195
AC adaptor
TV monitor**
to a wall outlet
Power cord*
to a wall outlet
to LAN