Using Audio Player For Adapter Application On Your Clié Handheld - Sony PEGA SA10 Operating Instructions Manual

Using Audio Player for Adapter application on
your CLIÉ handheld
Audio Player for Adapter allows you to play back audio files.
Before starting playback, be sure the CLIÉ handheld's battery is
fully charged.
Notes
• The automatic shut-off function of your CLIÉ handheld is disabled
during playback.
• Playback automatically stops when battery power becomes low;
however, you can still use other software applications, such as
Memo Pad or Address Book. Make sure to recharge the battery as
soon as possible before it is completely drained.
• When Audio Player for Adapter or gMovie is in operation, Beam
Transfer is not possible. "Beam Receive" under "Preferences" may
be set to OFF, in some cases.
• Do not remove the Audio Adapter from the CLIÉ handheld during
playback.
1
Insert the Memory Stick media into the Memory Stick
slot on your CLIÉ handheld.
2
Turn the Jog Dial navigator on the home screen of
your CLIÉ handheld to select the "AudioPlayer" icon,
and press the Jog Dial navigator to start up Audio
Player.
You can also tap the "AudioPlayer" icon to start up the
software.
Audio Player for Adapter starts and loads the music data
from the Memory Stick media.
Do not remove the Memory Stick media while the data is
being loaded (also while the Memory Stick access indicator on
your CLIÉ handheld is flashing). Otherwise, the data may be
destroyed or corrupted, or the CLIÉ handheld may
malfunction.
Notes
• If the battery of the CLIÉ handheld is not charged sufficiently,
malfunctions may occur. For example, the Audio Player for Adapter
might not start up or operate, or the power might turn off suddenly
during use. Be sure to charge the battery sufficiently before using.
• Depending on the number of music selections stored on the Memory
Stick media, it may take some time to load the music data. All Audio
Player for Adapter operations are disabled while the data is being
16
loaded. This is not a malfunction.