System Ota Upgrade - Launch X-431 PAD III Manual

LAUNCH
2. Your partner must install the TeamViewer full version program (if not installed,
go to http://www.teamviewer.com to download it), and then start the software
on his/her computer at the same time, in order to provide support and take
control of your tablet remotely.
3. Provide your ID to the partner, and wait for him/her to send you a remote
control request.
4. A dialog box asking for your confirmation to allow remote control on your
tablet will appear.
5. Tap Allow to accept, or tap Deny to reject.
For more information, please refer to the associated TeamViewer documents.

15.4 System OTA Upgrade

An Over-the-Air (OTA) update is the wireless delivery of new operating system,
software or data to tablets and mobile phones. Wireless carriers have
traditionally used over-the-air updates to deploy firmware and configure phones
or tablets for use on their network. The initialization of a newly purchased tablet
required an over-the-air update.
*Note: While performing OTA update, please make sure the tablet battery has at least
70% and DO NOT run any other programs during the update.
1. On the Home screen, tap Other modules -> System OTA Upgrade.
2. Tap "Check the Latest Version". Once a newer version is found, follow the
Fig. 15-2
140
X-431 PAD III User Manual