Launch X-431 PAD III Manual page 48

LAUNCH
software.
B. INPUT VIN: In this mode, you need to input the VIN manually. In general,
vehicle identification numbers are standardized - all contain 17 characters.
VIN characters may be capital letters A through Z and numbers 1 through 0;
however, the letters I, O and Q are never used in order to avoid mistakes of
misreading. No signs or spaces are allowed in the VIN.
Tap "INPUT VIN" and a screen similar to Fig. 5-14 will appear:
Input the VIN, and tap "Confirm", the system will automatically identify the
vehicle model and directly navigate to the function selection page.
2. Tap a corresponding diagnostic software logo, and then follow the
on-screen instruction to access the diagnostic software.
Take Demo as an example to demonstrate how to diagnose a vehicle.
1). Select diagnostic software version: Tap the "DEMO" to go to Step 2. (*Note: If
more than one version is available on this handset, it will be listed on the screen.)
X-431 PAD III User Manual
Fig. 5-14
Fig. 5-15
39