Set Absolute Horizontal Print Position Esc - Epson EP-4004 Programming Manual

5.1.7. Set absolute horizontal print position ESC ( $ nL nH m1 m2 m3 m4
ESC ( $ nL nH m1 m2 m3 m4
[Name]
[Format]
[Range of Definition]
[Function]
[Initial State]
[Related Commands]
Revision: 1
Set absolute horizontal print position
1BH, 28H, 24H, nL, nH, m1, m2, m3, m4
nL=04H, nH=00H
0 <= ( m4 * 1000000H + m3 * 10000H + m2 * 100H + m1 ) * 5760 <= 323.991 mm
(absolute horizontal position setting value)
0 <= ( m4 * 1000000H + m3 * 10000H + m2 * 100H + m1 ) * 5760 <= 73472 inch
(absolute horizontal position setting value)
1) The printing position in the X direction is set to the following positive value from the
origin (left margin position) on the X axis of the position management coordinate
system:
3
((m4×256 +m3×256
2)
If Left margin +(((m4×256
position setting value)) is beyond the right margin position, then this command is
ignored.
3) This Command is only effective in graphics mode.
-
[Setting] Commands whose settings are affected by this command.
None
[Setting] Commands that change the effects of this command.
None
[Operation] Commands whose functionality is affected by this command.
None
[Operation] Commands that change the effects of this command.
The absolute horizontal position setting units are set by the ESC (U command.
The absolute horizontal position setting units are reset to their initial state by the ESC @
and ESC (G commands.
The absolute horizontal print position is restored to its initial, default setting by the ESC
@ command.
OR
2
+ m2×256 + m1) x (absolute horizontal position setting value)
3 2
+m3×256 +m2×256+m1) x (absolute horizontal
Ver 1.00
[Operation]
5760
2013/Feb/08
Page: 32