Preventative Maintenance; Daily Inspection; Check The Tank Levels; Weekly Inspection - JPI JP-33 Service Manual

Maintenance Program

Preventative maintenance

Daily Inspection

1. Check the tank levels

Make sure that the chemistry inside the tanks is at the appropriate level. Also make sure to check the
level of the replenishment tanks.
2. Check the hoses and plumbing
Check all hose and connections for leaks.
immediately. Check each hose for kinks and make the appropriate adjustments to eliminate the kinks.

Weekly Inspection

1. Check the roller and film guide
Check the surface of roller for any damage, scratch or pollutants.
Check the film guide for any damage. Make sure all film guides are mounted firmly in their location.
2. Check the roller spring tension
A. The spring tension supporting the roller is a very important part of the rack.
B. The spring tension should firmly support the roller and it should not be loose.
- If the spring tension supporting the dryer exit rollers is loose, the film may not be guided out
properly and may be lost inside the unit or Jam the unit.
- If the spring tension supporting the squeegee rollers (rubber rollers) is loose, they will not
squeeze (dry) the chemistry or water, which will affect the image quality.
- The spring tension should not be too hard. This will make it difficult for the racks to rotate
smoothly. In this case, the rack will jump and/or film will jam.
- The spring tension should be the same on both ends of the roller. If not, due to uneven tension the
film may be guided off alignment and jam.
JP-33 SERVICE MANUAL
If there are any leaks contact your service center
- -
8
- Inspection